Handberäkning av betongpelare i jämförelse med FEM-program
Lemström, Thomas (2023)
Lemström, Thomas
2023
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2023052413773
https://urn.fi/URN:NBN:fi:amk-2023052413773
Tiivistelmä
Ordet FEM står för finite element method och är en populär metod inom ingenjörsbranschen att lösa problem med. Examensarbetet behandlar dimensioneringsgången hos en betongpelare enligt Eurokod 2. Det finns olika sätt att dimensionera en betongpelare på, men i detta arbete är det avgränsat till en metod, den så kallade nominella krökningsmetoden. Pelare som konstruktion valdes i detta arbete för att dimensioneringen innehåller en andra ordningens analys.
Syftet med arbetet var att undersöka armeringssätt och -mängder samt analysera hur resultaten skiljer sig mellan handberäkningar och beräkningsprogram. Programmen som använts i detta arbete är Autodesk Robot Structural Analysis och Strusoft Concrete Column.
Arbetet innehåller en teoridel där bakgrunder för att dimensioneringen ska vara möjlig tas upp. En enkel betongpelare dimensioneras med hjälp av de ovannämnda programmen och jämförs mot handberäkningar. Avslutningsvis kontrolleras resultaten och arbetet avslutas med en kort reflektion.
The thesis dealt with the design process of a concrete column according to Eurocode 2. There are various ways to design a concrete column, but this thesis was limited to a method called the nominal curvature method. A column was chosen as the structure for this work because the design included a second-order analysis. The purpose of the thesis was to investigate reinforcement methods and quantities and how the results differed between hand calculations and various calculation software. The programs used in this thesis were Autodesk Robot Structural Analysis and Strusoft Concrete Column. The thesis included a theoretical section where everything necessary was covered to enable the design process. A simple concrete column was designed using the earlier mentioned programs and compared to manual calculations. Finally, the results were checked, and the work concluded with a brief reflection.
Syftet med arbetet var att undersöka armeringssätt och -mängder samt analysera hur resultaten skiljer sig mellan handberäkningar och beräkningsprogram. Programmen som använts i detta arbete är Autodesk Robot Structural Analysis och Strusoft Concrete Column.
Arbetet innehåller en teoridel där bakgrunder för att dimensioneringen ska vara möjlig tas upp. En enkel betongpelare dimensioneras med hjälp av de ovannämnda programmen och jämförs mot handberäkningar. Avslutningsvis kontrolleras resultaten och arbetet avslutas med en kort reflektion.
The thesis dealt with the design process of a concrete column according to Eurocode 2. There are various ways to design a concrete column, but this thesis was limited to a method called the nominal curvature method. A column was chosen as the structure for this work because the design included a second-order analysis. The purpose of the thesis was to investigate reinforcement methods and quantities and how the results differed between hand calculations and various calculation software. The programs used in this thesis were Autodesk Robot Structural Analysis and Strusoft Concrete Column. The thesis included a theoretical section where everything necessary was covered to enable the design process. A simple concrete column was designed using the earlier mentioned programs and compared to manual calculations. Finally, the results were checked, and the work concluded with a brief reflection.