Konstruktion av fräsbord
Kaitajärvi, Jonas (2021)
Kaitajärvi, Jonas
2021
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-202104225404
https://urn.fi/URN:NBN:fi:amk-202104225404
Tiivistelmä
Detta examensarbete gjordes för företaget Solving Ab i Sandsund, som är världsledande inom automatiserad hantering för tunga laster. Hanteringssystemen använder antingen hjul eller luftkuddar för att förflytta laster på ett säkert sätt. Med luftkuddar kan man förflytta laster på en luftfilm nästan helt friktionsfritt.
Uppgiften gick ut på att planera och konstruera ett fräsbord för Solvings dotterbolag Solving Sweden Ab i Västerås. Luftkuddar är en relativt udda produkt, och därför är det svårt att köpa färdiga produktionsutrustningar och maskiner som är lämpade för uppgiften. Fräsbordets uppgift är att fräsa byggplattor som ska användas som stödplattor till vulkaniseringspressarna när man tillverkar luftkuddar. Arbetet avgränsades till konstruktion av fräsbord i en 3D-modell. Tillverkningsritningar, montering, och automationsplanering hör inte till arbetet.
Huvudsyftet med arbetet var att förnya och förbättra utrustningen för fräsning av byggplattor och göra det enklare, smidigare samt säkrare att fräsa ytterkanten av plattorna.
Metoderna som användes till detta arbete bestod av uppbyggnad av kravlista, planeringsprocess, koncept, och 3D-modellering.
Resultatet blev en 3D-modell av fräsbordet som uppfyller alla krav som har satts. Det krävs minimalt fysiskt arbete och är mycket smidigare att använda både tidsmässigt och kvalitetsmässigt. This bachelor´s thesis work was done for the company Solving Ab in Sandsund, they are world leaders in automated handling for heavy loads. Handling systems use either wheels or air bearings to move loads safely. With air bearings, you can move loads on an air film almost completely frictionlessly.
The task was to plan and construct a milling table for Solvings subsidiary Solving Sweden Ab in Västerås. Air bearings are a relatively odd product, and therefore it is difficult to buy finished production equipment and machines that are suitable for the task. The task of the milling table is to mill building plates that are to be used as support plates for the vulcanization presses when manufacturing air bearings. The work was limited to the construction of milling table in a 3D model. Manufacturing drawings, assembly, and automation planning are not a part of the work.
The main purpose of the work was to renew and improve the equipment for milling building plates, and make it easier, smoother, and safer to mill the outer edges of the plates.
The methods used for this work consisted of building a list of requirements, planning process, concepts, and 3D modeling.
The result was a 3D model of the milling table that meets all the requirements that have been set. It requires minimal physical work and is much easier to use both in terms of time and quality.
Uppgiften gick ut på att planera och konstruera ett fräsbord för Solvings dotterbolag Solving Sweden Ab i Västerås. Luftkuddar är en relativt udda produkt, och därför är det svårt att köpa färdiga produktionsutrustningar och maskiner som är lämpade för uppgiften. Fräsbordets uppgift är att fräsa byggplattor som ska användas som stödplattor till vulkaniseringspressarna när man tillverkar luftkuddar. Arbetet avgränsades till konstruktion av fräsbord i en 3D-modell. Tillverkningsritningar, montering, och automationsplanering hör inte till arbetet.
Huvudsyftet med arbetet var att förnya och förbättra utrustningen för fräsning av byggplattor och göra det enklare, smidigare samt säkrare att fräsa ytterkanten av plattorna.
Metoderna som användes till detta arbete bestod av uppbyggnad av kravlista, planeringsprocess, koncept, och 3D-modellering.
Resultatet blev en 3D-modell av fräsbordet som uppfyller alla krav som har satts. Det krävs minimalt fysiskt arbete och är mycket smidigare att använda både tidsmässigt och kvalitetsmässigt.
The task was to plan and construct a milling table for Solvings subsidiary Solving Sweden Ab in Västerås. Air bearings are a relatively odd product, and therefore it is difficult to buy finished production equipment and machines that are suitable for the task. The task of the milling table is to mill building plates that are to be used as support plates for the vulcanization presses when manufacturing air bearings. The work was limited to the construction of milling table in a 3D model. Manufacturing drawings, assembly, and automation planning are not a part of the work.
The main purpose of the work was to renew and improve the equipment for milling building plates, and make it easier, smoother, and safer to mill the outer edges of the plates.
The methods used for this work consisted of building a list of requirements, planning process, concepts, and 3D modeling.
The result was a 3D model of the milling table that meets all the requirements that have been set. It requires minimal physical work and is much easier to use both in terms of time and quality.