Testing and Approving Process of Steel Materials in an International Company
Paananen, Timo (2020)
Paananen, Timo
2020
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2020051912349
https://urn.fi/URN:NBN:fi:amk-2020051912349
Tiivistelmä
Työn aiheena oli kehittää Normet Oy:lle testaus- ja hyväksymisprosessi tuotannossa käytettäville teräksille. Teräsmateriaalien testausprosessi haluttiin kehittää, jotta voidaan varmistua eri maissa valmistettujen teräksien ominaisuuksista, ja niiden sopivuudesta Normetin koneiden valmistukseen. Tarkoituksena oli testata Intiassa valmistettuja eri teräslaatuja, ja verrata niiden ominaisuuksia Suomessa käytettäviin teräksiin. Työssä testattavat teräslaadut valittiin sen mukaan, mitä teräksiä Normetin koneiden valmistuksessa käytetään Suomessa. Testaukset suoritettiin kahdelle Intiassa valmistetulle teräsluokalle, ja kahdelle Normet Oy:n Suomen tehtaalla käytetylle teräsluokalle. Teräslevyille tehtiin myös menetelmäkokeen mukainen hitsausliitos, jotta voitiin tutkia eroavaisuuksia materiaalien hitsausominaisuuksissa. Testausmenetelminä teräksille käytettiin useita eri rikkovan aineenkoetuksen menetelmiä, joita olivat vetokoe, iskukoe, kovuusmittaus, taivutuskoe ja mikrohietutkimus. Koelevyjen hitsaus, koekappaleiden valmistus ja materiaalitestit suoritettiin Savonia-ammattikorkeakoulun laboratoriotiloissa. Lopputuloksena saatiin materiaalitestien tulokset valituista teräsluokista, tuloksista on mahdollista nähdä eroavaisuudet eri maissa valmistettujen teräksien ominaisuuksissa. Kokeiden perusteella voitiin valita Normetille tarpeelliset materiaalitestit tutkimalla, missä tuloksissa on eniten vaihtelua ja mitkä mekaanisista ominaisuuksista ovat tärkeimpiä. The aim of this thesis was to develop a testing- and approving process for steels that are used in the production of Normet machines. A testing process was needed to verify the properties of steels that are manufactured in different countries, and to make sure that the materials are suitable for Normet production. The purpose was to test different steel grades that are manufactured in India and compare the results to steels that are used in Finland. The steel grades for material testing were chosen according to what steels are generally used in the Normet products. The material testing was performed for two different steel grades that are manufactured in India, and for two steel grades that are used in the Normet Oy factory in Finland. Weld joints according to the welding procedure test were also made for the sample plates, to see differences in the weldability of different steels. The material mechanical properties were tested with several destructive material test methods that were: tensile-, impact-, hardness-, bend and microscopic examination tests. The welding of sample plates, manufacturing of the test specimens and the material testings were performed in laboratories of Savonia University of Applied Sciences. As a result, the material properties of different steel grades were tested. From these results it was possible to see differences between the material mechanical properties that are manufactured in different countries. The testing methods for material approving process were chosen based on these results, by studying what steel properties have most variance and what mechanical properties are most critical.