Lämpökäsittelyprosessien kartoitus
Nakari, Patrik (2023)
Nakari, Patrik
2023
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-202304286799
https://urn.fi/URN:NBN:fi:amk-202304286799
Tiivistelmä
Opinnäytetyön tavoitteena oli selvittää, miten voitaisiin kerätä tietoa karkaisuprosesseista ja mitä etävalvontamahdollisuuksia on olemassa ja mitä etuja voitaisiin saavuttaa näiden avulla. Tämän työn toimeksiantajana toimi Konecranes Finland Oy ja työ suoritettiin Hyvinkään tehtaalle. Opinnäytetyö tehtiin Industrial Equipment ETO Manufacturing Technology – tuotannonkehitystiimissä.
Aluksi työssä esitellään Konecranes yrityksenä. Lämpökäsittelyn teoriaosuus käsitellään sen jälkeen, koska työ vaati paljon ymmärrystä prosesseista. Teorian jälkeen esitellään vielä yrityksen lämpökäsittelyprosessit, jotka ovat hyvin oleelliset työssä.
Energiankulutuksen näkökulmasta tutkittiin, miten voidaan mitata sähkön- ja kaasunkulutusta. Tarkoitus oli erityisesti keskittyä kaasujärjestelmän toimintaan turvallisuuden ja tehokkuuden näkökulmasta. Tukea kartoitukseen haettiin karkaisimojen työntekijöiltä, joille suoritettiin kysely, sekä osalle haastattelu. Kaiken informaation noutamisen jälkeen ryhdyttiin purkamaan myös työntekijöiltä heränneitä huomioita.
Työssä heräsi paljon erilaisia projekteja ja osaan saatiin löydettyä ratkaisu. Osa ongelmista jäi ajatustasolle, josta yritys voi jatkaa halutessaan. Työn huomattavin tulos oli parannettu kaasuturvallisuus. Tämän ohessa voidaan nähdä parannus karkaisimon informaation tiedonkulussa työnjohdolle ja suunnittelulle. Lisäksi parannus kaasunkulutuksen seurannassa kunhan projektit saatetaan loppuun. The goal of the thesis was to find out how to collect information about the hardening process and what remote monitoring possibilities exist and what advantages could be achieved with these. This thesis was commissioned by Konecranes Finland Oy and made for the Hyvinkää factory. The thesis was done in the Industrial Equipment ETO Manufacturing Technology – manufacturing development team.
At first, the thesis introduces Konecranes as a company. The theory part of heat treatment will be familiarized after that, because the work required a lot of understanding of the processes. After the theory, the company's heat treatment processes are introduced, which are very essential considering the thesis.
From the point of view of energy consumption, it was investigated how electricity and gas consumption can be measured. The purpose was specially to focus on the operation of the gas system from the point of view of safety and efficiency. Support for the survey was requested from the employees of the hardening facilities, who were surveyed and some of them were interviewed. After gathering all the information, the observations made by the employees were also analyzed.
The project generated many different ideas, and solutions were found for some of them. Some problems remained at the conceptual stage, which the company can continue to work on if desired. The most significant result of the work was the improved gas safety. In addition to this, one can see an improvement in the information flow of the hardening facility for work management and planning. Moreover, there will be improved gas consumption monitoring once the projects are completed.
Aluksi työssä esitellään Konecranes yrityksenä. Lämpökäsittelyn teoriaosuus käsitellään sen jälkeen, koska työ vaati paljon ymmärrystä prosesseista. Teorian jälkeen esitellään vielä yrityksen lämpökäsittelyprosessit, jotka ovat hyvin oleelliset työssä.
Energiankulutuksen näkökulmasta tutkittiin, miten voidaan mitata sähkön- ja kaasunkulutusta. Tarkoitus oli erityisesti keskittyä kaasujärjestelmän toimintaan turvallisuuden ja tehokkuuden näkökulmasta. Tukea kartoitukseen haettiin karkaisimojen työntekijöiltä, joille suoritettiin kysely, sekä osalle haastattelu. Kaiken informaation noutamisen jälkeen ryhdyttiin purkamaan myös työntekijöiltä heränneitä huomioita.
Työssä heräsi paljon erilaisia projekteja ja osaan saatiin löydettyä ratkaisu. Osa ongelmista jäi ajatustasolle, josta yritys voi jatkaa halutessaan. Työn huomattavin tulos oli parannettu kaasuturvallisuus. Tämän ohessa voidaan nähdä parannus karkaisimon informaation tiedonkulussa työnjohdolle ja suunnittelulle. Lisäksi parannus kaasunkulutuksen seurannassa kunhan projektit saatetaan loppuun.
At first, the thesis introduces Konecranes as a company. The theory part of heat treatment will be familiarized after that, because the work required a lot of understanding of the processes. After the theory, the company's heat treatment processes are introduced, which are very essential considering the thesis.
From the point of view of energy consumption, it was investigated how electricity and gas consumption can be measured. The purpose was specially to focus on the operation of the gas system from the point of view of safety and efficiency. Support for the survey was requested from the employees of the hardening facilities, who were surveyed and some of them were interviewed. After gathering all the information, the observations made by the employees were also analyzed.
The project generated many different ideas, and solutions were found for some of them. Some problems remained at the conceptual stage, which the company can continue to work on if desired. The most significant result of the work was the improved gas safety. In addition to this, one can see an improvement in the information flow of the hardening facility for work management and planning. Moreover, there will be improved gas consumption monitoring once the projects are completed.