CE-märkning av produktionslinje
Fagerholm, Adrian (2021)
Fagerholm, Adrian
2021
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-202105046902
https://urn.fi/URN:NBN:fi:amk-202105046902
Tiivistelmä
Detta examensarbete är gjort på uppdrag av Snellmans Köttförädling Ab, som är en av de största producenterna av köttprodukter i Finland. På fabriken finns ett stort antal såväl gamla och nya maskiner som ibland behöver modifieras för att kunna effektivera produktionen och göra maskinerna säkrare. Dock vid en modifiering av en maskin så kan CE-märkningen på maskinen förfalla och behöver uppdateras.
Syftet med detta arbete var att hitta ett sätt att praktiskt applicera ett flödesschema för CE-märkning som företaget har fått från ett tidigare examensarbete skrivet av Filip Sundström, och också applicera schemat vid CE-märkning av en produktionslinje. Genom att hitta sätt att praktiskt utföra stegen i processchemat kan företaget internt utföra CE märkningar på modifierade maskiner och produktionslinjer.
Arbetet började med att ta reda på hur man CE-märker en maskin eller en produktionslinje, samt när CE-märkningen behöver uppdateras, och sedan sammanställa de olika stegen till ett processchema. Vidare undersöktes den produktionslinje som skulle CE-märkas för att se vilka maskiner som ingår, maskinernas funktioner och att utföra nödvändiga åtgärder som CE-märkningen kräver.
Resultatet blev ett processchema som ska hjälpa företaget i sitt arbete med CE-märkning av maskiner och produktionslinjer. Utöver detta också en CE-märkt produktionslinje. This thesis was commissioned by Snellmans Köttförädling Ab, who is one of the largest producers of meat in Finland. The factory has a large number of both old and new machines that sometimes need to be modified to be more efficient and safer. However, when machines are modified, the CE-mark of the machine may expire, and therefore needs to be updated.
The purpose of this work was to find a way to apply a flow chart for CE-marking that the company has received from a previous thesis written by Filip Sundström, and use the flow chart when CE-marking a production line. By finding ways to practically perform the steps in the flow chart, the company can CE-mark their modified machines internally.
The work began by finding out how to CE-mark a machine or a production line, as well as when the CE-mark needs to be updated, and then compile the various steps into a flow chart. Furthermore, the production line that was to be CE-marked was examined to see which machines the line includes, the function of those machines and to perform the necessary measures required for the CE-mark.
The result in the thesis is a flow chart that will help the company in their work with CE marking their machines and production lines. In addition to the flow chart a production line was CE-marked.
Syftet med detta arbete var att hitta ett sätt att praktiskt applicera ett flödesschema för CE-märkning som företaget har fått från ett tidigare examensarbete skrivet av Filip Sundström, och också applicera schemat vid CE-märkning av en produktionslinje. Genom att hitta sätt att praktiskt utföra stegen i processchemat kan företaget internt utföra CE märkningar på modifierade maskiner och produktionslinjer.
Arbetet började med att ta reda på hur man CE-märker en maskin eller en produktionslinje, samt när CE-märkningen behöver uppdateras, och sedan sammanställa de olika stegen till ett processchema. Vidare undersöktes den produktionslinje som skulle CE-märkas för att se vilka maskiner som ingår, maskinernas funktioner och att utföra nödvändiga åtgärder som CE-märkningen kräver.
Resultatet blev ett processchema som ska hjälpa företaget i sitt arbete med CE-märkning av maskiner och produktionslinjer. Utöver detta också en CE-märkt produktionslinje.
The purpose of this work was to find a way to apply a flow chart for CE-marking that the company has received from a previous thesis written by Filip Sundström, and use the flow chart when CE-marking a production line. By finding ways to practically perform the steps in the flow chart, the company can CE-mark their modified machines internally.
The work began by finding out how to CE-mark a machine or a production line, as well as when the CE-mark needs to be updated, and then compile the various steps into a flow chart. Furthermore, the production line that was to be CE-marked was examined to see which machines the line includes, the function of those machines and to perform the necessary measures required for the CE-mark.
The result in the thesis is a flow chart that will help the company in their work with CE marking their machines and production lines. In addition to the flow chart a production line was CE-marked.