Uima-allas laitehuoneen suunnittelu ja modulointi mahdollisuus
Forsell, Andrei (2020)
Forsell, Andrei
2020
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2020112023523
https://urn.fi/URN:NBN:fi:amk-2020112023523
Tiivistelmä
Opinnäytetyön tavoitteena oli hankkia ja koota laivojen uima-allas laitehuoneiden tarvittava tieto, sekä tutkia laitehuoneiden komponenttien modulointi mahdollisuuksia. Työn toimeksiantaja oli ENG’nD Oy.
Työ aloitettiin tutkimalla ja keräämällä uima-allas laitehuoneen suunnitteluun tarvittavat dokumentit sekä standardit.
Lopputuloksena saatiin yksi dokumentti, jossa on kerätty kaikki suunnitteluun tarvittavat asiat sekä standardit. Dokumentin avulla uima-allas laitehuoneita saadaan suunniteltua nopeammin. Modulointi mahdollisuuksia tutkimalla saatiin selville, että uima-allas laitehuoneen kaikkia putkia voi kerätä putkipakettiin ja laitehuoneessa olevat koneet ovat jo valmiiksi moduulissa. The purpose of this thesis was to search and compile the necessary information for the ship’s swimming pool equipment rooms and explore the possibilities of modulating the components of the equipment rooms. The thesis was commissioned by ENG’nD Ltd.
The work was started by examining and collecting the documents and standards needed to design the swimming pool equipment room.
Thesis result was one document that where were collected all the things needed for the design as well as the standards. The document will allow pool equipment rooms to be designed faster. Examining the possibilities of modulation, it was found that all the pipes in the swimming pool equipment room can be collected in a pipe package and the machines in the equipment room are already ready in module.
Työ aloitettiin tutkimalla ja keräämällä uima-allas laitehuoneen suunnitteluun tarvittavat dokumentit sekä standardit.
Lopputuloksena saatiin yksi dokumentti, jossa on kerätty kaikki suunnitteluun tarvittavat asiat sekä standardit. Dokumentin avulla uima-allas laitehuoneita saadaan suunniteltua nopeammin. Modulointi mahdollisuuksia tutkimalla saatiin selville, että uima-allas laitehuoneen kaikkia putkia voi kerätä putkipakettiin ja laitehuoneessa olevat koneet ovat jo valmiiksi moduulissa.
The work was started by examining and collecting the documents and standards needed to design the swimming pool equipment room.
Thesis result was one document that where were collected all the things needed for the design as well as the standards. The document will allow pool equipment rooms to be designed faster. Examining the possibilities of modulation, it was found that all the pipes in the swimming pool equipment room can be collected in a pipe package and the machines in the equipment room are already ready in module.