Senkan kääntölaitteen laakereiden vaihto
Ilpoinen, Heidi (2019)
Ilpoinen, Heidi
2019
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2019052611966
https://urn.fi/URN:NBN:fi:amk-2019052611966
Tiivistelmä
Opinnäytetyö tehtiin Outokumpu Stainless Oy:lle Tornion terässulatto linja 1:lle.
Tarkoituksena oli toteuttaa senkan kunnostuspaikan kääntölaitteen laakereiden
vaihto ja suunnitella toimintavaiheet toteutukselle. Senkan kääntölaitteen laakerit olivat vielä alkuperäiset. Opinnäytetyön lopussa pohdittiin myös huoltosuunnitelmaa jatkoa varten.
Työn tavoitteena oli laatia toimiva suunnitelma, jonka mukaan laakerit voidaan
vaihtaa senkan kääntölaitteeseen sekä helpottaa myös jatkossa laakereiden
vaihtoa. Työn alussa käsiteltiin kunnossapidon ja laakereiden teoriaa. Työssä
käytiin läpi tarkemmin eri toimintavaiheita, aikataulua ja huomioitiin työturvalli-
suus.
Opinnäytetyön tuloksena saatiin toimeksiantajalle ohjaava kokonaisuus senkan
kääntölaitteen laakereiden vaihtotyölle, joka toteutetaan vuosihuollossa. The thesis was made for Outokumpu Stainless Oy for Tornio Steel melting shop.
The purpose was to implement the bearing replacement of the turning device of the refurbishment site and plan action steps for the implementation. In ladle turning device, the bearings were still original. At the end of the thesis, also the service plan was considered for the future.
The aim of the work was to prepare a functioning plan to replace the bearings on the turning device switches to the swing device and also to facilitate the bearing replacement in the future. The theory of maintenance and bearing was discussed at the beginning of the work. The work also deals with the different phases of the action, as well as the timetable and the work safety.
As a result of the thesis, the instructions were provided to the client for the re-placement of the bearings on the turning device to be carried out at annual maintenance.
Tarkoituksena oli toteuttaa senkan kunnostuspaikan kääntölaitteen laakereiden
vaihto ja suunnitella toimintavaiheet toteutukselle. Senkan kääntölaitteen laakerit olivat vielä alkuperäiset. Opinnäytetyön lopussa pohdittiin myös huoltosuunnitelmaa jatkoa varten.
Työn tavoitteena oli laatia toimiva suunnitelma, jonka mukaan laakerit voidaan
vaihtaa senkan kääntölaitteeseen sekä helpottaa myös jatkossa laakereiden
vaihtoa. Työn alussa käsiteltiin kunnossapidon ja laakereiden teoriaa. Työssä
käytiin läpi tarkemmin eri toimintavaiheita, aikataulua ja huomioitiin työturvalli-
suus.
Opinnäytetyön tuloksena saatiin toimeksiantajalle ohjaava kokonaisuus senkan
kääntölaitteen laakereiden vaihtotyölle, joka toteutetaan vuosihuollossa.
The purpose was to implement the bearing replacement of the turning device of the refurbishment site and plan action steps for the implementation. In ladle turning device, the bearings were still original. At the end of the thesis, also the service plan was considered for the future.
The aim of the work was to prepare a functioning plan to replace the bearings on the turning device switches to the swing device and also to facilitate the bearing replacement in the future. The theory of maintenance and bearing was discussed at the beginning of the work. The work also deals with the different phases of the action, as well as the timetable and the work safety.
As a result of the thesis, the instructions were provided to the client for the re-placement of the bearings on the turning device to be carried out at annual maintenance.