Julkisivun ohutrappaukset : tuotannonsuunnittelu ja -ohjaus
Österholm, Tom (2019)
Österholm, Tom
2019
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-201904245841
https://urn.fi/URN:NBN:fi:amk-201904245841
Tiivistelmä
Opinnäytetyön tavoitteena oli luoda opas NCC Suomi Oy:lle eristeiden päälle tehtävien ohutrappauksien koko tuotantoprosessista. Työssä kartoitettiin kirjallisuudesta tietoa ohutrappaustyön suunnittelusta, ohjauksesta sekä laadunvarmistuksesta.
Opinnäytetyöhön on kerätty tietoa EPS-eristettyjen elementtien ulkopintaan tehtävistä ohutrappauksista. Tarkoituksena on tuoda esiin juuri EPS-eristeiden ja elementtitoteutuksen ohutrappauksien tuotannon suunnittelussa ja -ohjauksessa huomioitavat asiat, esimerkiksi palomääräykset, elementtien asennukset ja eristepinnan tasaaminen. Osa työssä esitetyistä asioista, kuten sääolosuhteet, logistiikka ja rappauksien toteutusperiaate sopivat yleisesti kaikenlaisten rappauksien suunnitteluun.
Opinnäytetyön tutkimusosassa selvitetään ohutrappauksien työvaiheiden kestoja kuukulkijoilla tehtävillä rappauksilla. Työvaiheita ovat karkeasti suojaukset, eristepinnan tasaaminen, vahvikkeiden ja profiilien asennus, pohjarappaus ja pinnoittaminen. Työmenekkejä selvitettiin 2018 kesällä dokumentoimalla tarkasti rappaustyön etenemistä. Saatuja työmenekkejä vertaillaan Ratu-kortiston antamiin arvoihin, minkä pohjalta luodaan NCC Suomi Oy:lle Excel-laskentapohja rappauksien aikataulujen suunnitteluun.
Hyvällä ennakkosuunnittelulla sekä onnistuneella runkotyöllä on suuri vaikutus laadukkaan, kustannustehokkaan sekä aikataulunmukaisen ohutrappaustyön onnistumiseen. Ohutrappausdetaljien suunnittelussa tulee korostaa toteutuskelpoisuutta sekä tärkeiden asioiden, kuten esimerkiksi rakenteen vesitiiveyden, esiin tuomista. Opinnäytetyössä tutkitun esimerkkikohteen aukoista tehdyt suunnitelmat sekä elementtitehtaan toteutus eivät vastanneet toisiaan, mikä vaikutti rappauksien tuotannon ohjaukseen merkittävästi. Tämän takia ohutrappaukset tulee suunnitella ja toteuttaa kokonaisuudessaan julkisivutöinä. Kaikki julkisivuun liittyvät pienimmätkin asiat tulee huomioida myös ohutrappauksien suunnitelmissa. Koko ohutrappauksien tuotantoprosessia tuleekin kehittää. The aim of this thesis was to create a guide for NCC Suomi Oy about entire production process of thin coat renderings. General information on the production planning, management and quality assurance of thin coat rendering work was collected from literature.
The thesis collects information about thin coat renderings completed on the outer surface of prefabricated EPS insulated elements. The aim was to highlight the issues that must be taken into consideration in the planning and management of the production of thin coat renderings of EPS insulation and element implementation, although a number of the issues presented in the work are generally suitable for all types of plasterwork.
The research part of the thesis explains the duration of the different work stages with render-ings on the boom lifts. Man hour requirements were reviewed in the summer of 2018 by docu-menting the progress of a plaster work. The resulting labour requirements were compared with the values provided by the Ratu database. An Excel chart based on the resulting labour re-quirements was completed for NCC Suomi Oy for scheduling thin coat renderings.
Good planning and successful frame erection work have a great impact on the success of high-quality, cost-effective, and well scheduled thin coat rendering work. Thin coat rendering detailing should emphasize the feasibility and the highlighting of important issues. The designs based on the openings of the case studied in the thesis and the implementation of the element factory did not correspond to each other, which significantly influenced the control of the pro-duction of plasterwork.
Thin coat renderings should be considered as a complete facade. All the smallest points relat-ed to the façade should be taken into account in the structural planning of thin coat renderings. Therefore, the whole process of producing thin coat renderings must be developed.
Opinnäytetyöhön on kerätty tietoa EPS-eristettyjen elementtien ulkopintaan tehtävistä ohutrappauksista. Tarkoituksena on tuoda esiin juuri EPS-eristeiden ja elementtitoteutuksen ohutrappauksien tuotannon suunnittelussa ja -ohjauksessa huomioitavat asiat, esimerkiksi palomääräykset, elementtien asennukset ja eristepinnan tasaaminen. Osa työssä esitetyistä asioista, kuten sääolosuhteet, logistiikka ja rappauksien toteutusperiaate sopivat yleisesti kaikenlaisten rappauksien suunnitteluun.
Opinnäytetyön tutkimusosassa selvitetään ohutrappauksien työvaiheiden kestoja kuukulkijoilla tehtävillä rappauksilla. Työvaiheita ovat karkeasti suojaukset, eristepinnan tasaaminen, vahvikkeiden ja profiilien asennus, pohjarappaus ja pinnoittaminen. Työmenekkejä selvitettiin 2018 kesällä dokumentoimalla tarkasti rappaustyön etenemistä. Saatuja työmenekkejä vertaillaan Ratu-kortiston antamiin arvoihin, minkä pohjalta luodaan NCC Suomi Oy:lle Excel-laskentapohja rappauksien aikataulujen suunnitteluun.
Hyvällä ennakkosuunnittelulla sekä onnistuneella runkotyöllä on suuri vaikutus laadukkaan, kustannustehokkaan sekä aikataulunmukaisen ohutrappaustyön onnistumiseen. Ohutrappausdetaljien suunnittelussa tulee korostaa toteutuskelpoisuutta sekä tärkeiden asioiden, kuten esimerkiksi rakenteen vesitiiveyden, esiin tuomista. Opinnäytetyössä tutkitun esimerkkikohteen aukoista tehdyt suunnitelmat sekä elementtitehtaan toteutus eivät vastanneet toisiaan, mikä vaikutti rappauksien tuotannon ohjaukseen merkittävästi. Tämän takia ohutrappaukset tulee suunnitella ja toteuttaa kokonaisuudessaan julkisivutöinä. Kaikki julkisivuun liittyvät pienimmätkin asiat tulee huomioida myös ohutrappauksien suunnitelmissa. Koko ohutrappauksien tuotantoprosessia tuleekin kehittää.
The thesis collects information about thin coat renderings completed on the outer surface of prefabricated EPS insulated elements. The aim was to highlight the issues that must be taken into consideration in the planning and management of the production of thin coat renderings of EPS insulation and element implementation, although a number of the issues presented in the work are generally suitable for all types of plasterwork.
The research part of the thesis explains the duration of the different work stages with render-ings on the boom lifts. Man hour requirements were reviewed in the summer of 2018 by docu-menting the progress of a plaster work. The resulting labour requirements were compared with the values provided by the Ratu database. An Excel chart based on the resulting labour re-quirements was completed for NCC Suomi Oy for scheduling thin coat renderings.
Good planning and successful frame erection work have a great impact on the success of high-quality, cost-effective, and well scheduled thin coat rendering work. Thin coat rendering detailing should emphasize the feasibility and the highlighting of important issues. The designs based on the openings of the case studied in the thesis and the implementation of the element factory did not correspond to each other, which significantly influenced the control of the pro-duction of plasterwork.
Thin coat renderings should be considered as a complete facade. All the smallest points relat-ed to the façade should be taken into account in the structural planning of thin coat renderings. Therefore, the whole process of producing thin coat renderings must be developed.