0,4 KV JA 20 KV SÄHKÖVERKON TARKASTUSOHJE
Härkönen, Tuomas (2022)
Härkönen, Tuomas
2022
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-202205067580
https://urn.fi/URN:NBN:fi:amk-202205067580
Tiivistelmä
Opinnäytetyön tavoitteena oli tehdä G42 Servicelle uusi ohje sähköverkon tarkastuksiin. Ohje suunnattiin
etenkin uusille työntekijöille perehdytyskäyttöön, mutta myös kokeneet työntekijät voivat hyödyntää sitä
tarvittaessa. Ohje koskee 0,4 kV ja 20 kV sähköverkkoja. Tarkastusohje tehtiin siten, että sitä olisi helppo
muokata tulevaisuudessa ja ohjeen pohjaa voisi käyttää muissa yrityksen sisäisissä ohjeistuksissa. Lisäksi
ohje tiivistettiin mahdollisimman lyhyeksi, jotta sen jaksaisi lukea kokonaan ja se olisi toimiva käytännön
työssä. Tämän vuoksi ohjeessa otettiin vain tärkeimmät ja olennaisimmat asiat huomioon.
Työssä perehdyttiin sähköturvallisuuslakiin, standardeihin ja HeadPowerin aineistoihin koskien sähköverkon
merkintöjä ja etäisyyksiä. Keskeisiksi aihealueiksi määriteltiin kuntotarkastus, lahotarkastus ja muuntamot.
Aluksi suunniteltiin järkevä ja johdonmukaisesti etenevä järjestys käsiteltäville aihealueille, jotta ohje olisi
mahdollisimman helppolukuinen. Tämän jälkeen ohjetta tehtiin aihe kerrallaan.
Tarkastusohjeesta tuli selkeä. Tarkastusohjeen toimivuus ja mahdolliset muutostarpeet selviävät seuraavina
vuosina käyttöönoton myötä. Työntekijöiltä kerätään palautetta ja ohjetta korjataan saadun palautteen
avulla. Tulevaisuudessa ohje voi tarvita päivitystä, kun standardit päivittyvät ja sähköverkoille tulee uusia
vaatimuksia. The purpose of this thesis was to create a new electrical network inspection guide for G42 Services Oy. The
guide was directed especially for new employees, but more experienced employees can also benefit from
this guide. The guide applies to 0.4 kV and 20 kV electrical networks. The inspection guide was made in
such a way that it would be easy to modify it in the future and the instruction frame could be used in other
internal company guidelines. In addition, the guide was reduced as short as possible so that it could be easily read from beginning to end and also to make it practical to use while working. Because of this, the guide
only pays attention to the most important and relevant subjects.
The main sources of information for the thesis were Electrical Safety Act, standards and HeadPower materials for markings and overhead line distances. The key subject areas defined were the overall inspection of
the electrical network, inspection of the degree of decay in the poles, and electrical transformers. The process began by determining a consistent order of the subjects to make the guide as easy to read as possible.
After this, the guide was made by focusing on one subject at a time.
As a result of this thesis, a new inspection guide for G42 Services was made and it is ready to be used from
the beginning of summer 2022. The Inspection guide became practical and changes to be made will be clarified in the following years as it has been used in practice. Feedback should be collected from employees and
then used in improving the guide. In the future the guide might need an upgrade because standards will update, and new requirements for power grids may be obliged by law.
etenkin uusille työntekijöille perehdytyskäyttöön, mutta myös kokeneet työntekijät voivat hyödyntää sitä
tarvittaessa. Ohje koskee 0,4 kV ja 20 kV sähköverkkoja. Tarkastusohje tehtiin siten, että sitä olisi helppo
muokata tulevaisuudessa ja ohjeen pohjaa voisi käyttää muissa yrityksen sisäisissä ohjeistuksissa. Lisäksi
ohje tiivistettiin mahdollisimman lyhyeksi, jotta sen jaksaisi lukea kokonaan ja se olisi toimiva käytännön
työssä. Tämän vuoksi ohjeessa otettiin vain tärkeimmät ja olennaisimmat asiat huomioon.
Työssä perehdyttiin sähköturvallisuuslakiin, standardeihin ja HeadPowerin aineistoihin koskien sähköverkon
merkintöjä ja etäisyyksiä. Keskeisiksi aihealueiksi määriteltiin kuntotarkastus, lahotarkastus ja muuntamot.
Aluksi suunniteltiin järkevä ja johdonmukaisesti etenevä järjestys käsiteltäville aihealueille, jotta ohje olisi
mahdollisimman helppolukuinen. Tämän jälkeen ohjetta tehtiin aihe kerrallaan.
Tarkastusohjeesta tuli selkeä. Tarkastusohjeen toimivuus ja mahdolliset muutostarpeet selviävät seuraavina
vuosina käyttöönoton myötä. Työntekijöiltä kerätään palautetta ja ohjetta korjataan saadun palautteen
avulla. Tulevaisuudessa ohje voi tarvita päivitystä, kun standardit päivittyvät ja sähköverkoille tulee uusia
vaatimuksia.
guide was directed especially for new employees, but more experienced employees can also benefit from
this guide. The guide applies to 0.4 kV and 20 kV electrical networks. The inspection guide was made in
such a way that it would be easy to modify it in the future and the instruction frame could be used in other
internal company guidelines. In addition, the guide was reduced as short as possible so that it could be easily read from beginning to end and also to make it practical to use while working. Because of this, the guide
only pays attention to the most important and relevant subjects.
The main sources of information for the thesis were Electrical Safety Act, standards and HeadPower materials for markings and overhead line distances. The key subject areas defined were the overall inspection of
the electrical network, inspection of the degree of decay in the poles, and electrical transformers. The process began by determining a consistent order of the subjects to make the guide as easy to read as possible.
After this, the guide was made by focusing on one subject at a time.
As a result of this thesis, a new inspection guide for G42 Services was made and it is ready to be used from
the beginning of summer 2022. The Inspection guide became practical and changes to be made will be clarified in the following years as it has been used in practice. Feedback should be collected from employees and
then used in improving the guide. In the future the guide might need an upgrade because standards will update, and new requirements for power grids may be obliged by law.