Tietomalliprototyypin tuottaminen opetuskäyttöön
Sonninen, Jaro (2021)
Sonninen, Jaro
2021
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2021121025096
https://urn.fi/URN:NBN:fi:amk-2021121025096
Tiivistelmä
Opinnäytetyön tavoitteena oli tuottaa malli, jolla voidaan opettaa tietomallinnusta ja tyyppirakenteita. Toimeksiantajan pyynnöstä luotiin tietomalli, johon sisällytettiin yleisimpiä tyyppirakenteita betoni- ja teräsmateriaaleilla. Tietomalliin lisättiin myös opetusvideoita, joiden avulla pystyy oppimaan objektien lisäämistä tietomalliin Tekla Structures ohjelmalla.
Opinnäytetyön toteutus suoritettiin suunnittelemalla esimerkkirakennus, johon voidaan toteuttaa eri materiaalien tyyppirakenteet ja josta voidaan tehdä tietomalli. Rakennuksen suunnittelussa pyrittiin yksinkertaiseen ratkaisuun käytännöllisyyteen. Tietomallin tuottamiseen käytettiin Tekla Structures ohjelmaa. Tietomallia tehdessä otettiin näyttötallenteita, jotka arkistoitiin Jyväskylän Ammattikorkeakoulun Panopto
tietokantaan. Arkistoidut videot linkitettiin tietomalliin lisättyihin objekteihin viisinumeroisella koodauksella.
Opinnäytetyön tuloksena syntyi tietomalli kahdesta eri materiaalilla suunnitellusta mallista. Arkistoituja videoita tuotettiin opinnäytetyötä varten 55. Tuloksena syntynyt malli saavutti sille asetetun tavoitteen. Malliin jäi kuitenkin vielä kehitettävää ja kehitystyötä jatketaan. The aim of the thesis was to produce a model that can be used to teach BIM- modeling and structure types.
At the request of the mandator, I produced a BIM- model that included the most common structure types
with concrete and steel materials. Tutorial videos were also added to the BIM- model to learn how to add
objects to the model when using Tekla Structures.
The thesis was completed by designing an example building. The building was designed so that the type
structures of different materials could be added to it and a BIM- model could be made into it. The design of
the building was based on a simple solution and practicality. The BIM-model has been produced by Tekla
Structures. When the BIM- model was produced, screen recordings were taken at the same time, which
were archived in the Panopto video library of Jyväskylä University of Applied Sciences. Videos were linked
to BIM- objects with a five-digit code.
As a result of the thesis, a BIM- model was created. The BIM- model is designed with two different materi als (Steel and Concrete). 55 archived videos were produced for the thesis. The result of the thesis met the
requirements set for it. However, there is still room for development in the model and development work
will continue.
Opinnäytetyön toteutus suoritettiin suunnittelemalla esimerkkirakennus, johon voidaan toteuttaa eri materiaalien tyyppirakenteet ja josta voidaan tehdä tietomalli. Rakennuksen suunnittelussa pyrittiin yksinkertaiseen ratkaisuun käytännöllisyyteen. Tietomallin tuottamiseen käytettiin Tekla Structures ohjelmaa. Tietomallia tehdessä otettiin näyttötallenteita, jotka arkistoitiin Jyväskylän Ammattikorkeakoulun Panopto
tietokantaan. Arkistoidut videot linkitettiin tietomalliin lisättyihin objekteihin viisinumeroisella koodauksella.
Opinnäytetyön tuloksena syntyi tietomalli kahdesta eri materiaalilla suunnitellusta mallista. Arkistoituja videoita tuotettiin opinnäytetyötä varten 55. Tuloksena syntynyt malli saavutti sille asetetun tavoitteen. Malliin jäi kuitenkin vielä kehitettävää ja kehitystyötä jatketaan.
At the request of the mandator, I produced a BIM- model that included the most common structure types
with concrete and steel materials. Tutorial videos were also added to the BIM- model to learn how to add
objects to the model when using Tekla Structures.
The thesis was completed by designing an example building. The building was designed so that the type
structures of different materials could be added to it and a BIM- model could be made into it. The design of
the building was based on a simple solution and practicality. The BIM-model has been produced by Tekla
Structures. When the BIM- model was produced, screen recordings were taken at the same time, which
were archived in the Panopto video library of Jyväskylä University of Applied Sciences. Videos were linked
to BIM- objects with a five-digit code.
As a result of the thesis, a BIM- model was created. The BIM- model is designed with two different materi als (Steel and Concrete). 55 archived videos were produced for the thesis. The result of the thesis met the
requirements set for it. However, there is still room for development in the model and development work
will continue.