Moottoreiden koeajon valmistelun kehitys
Bäckström, Robert (2021)
Bäckström, Robert
2021
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2021112321265
https://urn.fi/URN:NBN:fi:amk-2021112321265
Tiivistelmä
Opinnäytetyö on tehty Wärtsilä Finland Oy:n kanssa Smart Technology Hubin moottorin valmisteluun. Tässä opinnäytetyössä suunnitellaan ja kehitetään uutta valmisteluprosessia koeajoon. Työn tavoitteena on kehittää moottorin valmistelua uuteen ympäristöön ja laadun varmistaminen ennen moottorin viemistä koeajo selliin. Moottorin valmistelualue sijaitsee Smart Technology Hub -rakennuksessa pääkokoonpanon ja koeajon välissä. Kehitysideoissa on vähennetty työtä ja parannettu työturvallisuutta olemassa oleviin ratkaisuihin. Valmistelun tarkoitetut kehitysideat vaikuttavat osittain kokoonpanoon, koeajoon ja moottorin viimeistelyyn. Lisäksi valmistelualueella suoritettavan moottorin öljyhuuhtelua on tarkasteltu ja analysoitu huuhteluraporttien pohjalta.
Opinnäytetyössä tarkastellaan yleisesti valmistelun vaikutusta koeajon tehokkuuteen ja miten sitä voidaan parantaa. Työn alussa tutustuttiin olemassa oleviin ohjeisiin ja toiminta malleihin, jotta tiedetään mitä kehittää. Opinnäytetyön aikana verkostoiduttiin ja haastateltiin johtoporrasta, laatuorganisaatiota, alihankkijoita, työkaluosastoa, suunnittelua, kokoonpanon sekä koeajon työntekijöitä ongelmien ja mahdollisten kehitys kohteiden kartoittamiseksi.
Tuloksena saatiin uusi toimintamalli moottorin vesijärjestelmän koeponnistukseen, uusia ideoita pakoputken välikappaleille, uudelleen sijoitus ilmausventtiilille, turbon imukäyrälle uusi suojaritilä ja öljyn huuhtelua analysoimalla löydettiin ongelman lähde. Opinnäytetyössä päästiin tavoitteeseen, eli näillä toimilla saadaan valmiimpi moottori koeajoon. Kehitysideat on testattu ja niiden toteuttamiseen on tehty suunnitelma. The thesis was done for Wärtsilä Finland Oy on the engine preparation of the Smart Technology Hub. In this thesis, a new preparation process for the test run was planned and developed. The aim of the work is to develop the preparation of the engine for the new environment and to ensure the quality before bringing the engine into the test cell. The engine preparation area is in the Smart Technology Hub building between the main assembly and the test run.
The thesis examines the effect of preparation on the efficiency of a test run and how it can be improved. First, the existing guidelines and operating models were studied to know what could be developed. During the thesis, the management team, quality organization, subcontractors, tool department, designers, assembly, and test drive employees were networked and interviewed to identify problems and areas for development. In addition, the oil flushing of the engine at the preparation area was reviewed and analyzed based on flushing reports.
The result was a new operating model for the test effort of the engine water system, innovative ideas for exhaust manifolds, relocation to the bleed valve, a new protective grille for the turbo intake curve, and analysis of the oil flush found the source of the problem. The development ideas made in the thesis have reduced work and improved occupational safety to existing solutions. The development ideas for preparation have a partial effect on assembly, test run, and engine finishing. The goal was achieved in the thesis, so these actions make the engine more ready for the test run. The development ideas have been tested and a plan has been drawn up for them.
Opinnäytetyössä tarkastellaan yleisesti valmistelun vaikutusta koeajon tehokkuuteen ja miten sitä voidaan parantaa. Työn alussa tutustuttiin olemassa oleviin ohjeisiin ja toiminta malleihin, jotta tiedetään mitä kehittää. Opinnäytetyön aikana verkostoiduttiin ja haastateltiin johtoporrasta, laatuorganisaatiota, alihankkijoita, työkaluosastoa, suunnittelua, kokoonpanon sekä koeajon työntekijöitä ongelmien ja mahdollisten kehitys kohteiden kartoittamiseksi.
Tuloksena saatiin uusi toimintamalli moottorin vesijärjestelmän koeponnistukseen, uusia ideoita pakoputken välikappaleille, uudelleen sijoitus ilmausventtiilille, turbon imukäyrälle uusi suojaritilä ja öljyn huuhtelua analysoimalla löydettiin ongelman lähde. Opinnäytetyössä päästiin tavoitteeseen, eli näillä toimilla saadaan valmiimpi moottori koeajoon. Kehitysideat on testattu ja niiden toteuttamiseen on tehty suunnitelma.
The thesis examines the effect of preparation on the efficiency of a test run and how it can be improved. First, the existing guidelines and operating models were studied to know what could be developed. During the thesis, the management team, quality organization, subcontractors, tool department, designers, assembly, and test drive employees were networked and interviewed to identify problems and areas for development. In addition, the oil flushing of the engine at the preparation area was reviewed and analyzed based on flushing reports.
The result was a new operating model for the test effort of the engine water system, innovative ideas for exhaust manifolds, relocation to the bleed valve, a new protective grille for the turbo intake curve, and analysis of the oil flush found the source of the problem. The development ideas made in the thesis have reduced work and improved occupational safety to existing solutions. The development ideas for preparation have a partial effect on assembly, test run, and engine finishing. The goal was achieved in the thesis, so these actions make the engine more ready for the test run. The development ideas have been tested and a plan has been drawn up for them.