AV-JÄRJESTELMÄN OHJELMOINTI
Niemelä, Juha (2011)
Niemelä, Juha
Jyväskylän ammattikorkeakoulu
2011
All rights reserved
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-201105198636
https://urn.fi/URN:NBN:fi:amk-201105198636
Tiivistelmä
Opinnäytetyön toimeksiantajana toimi jyväskyläläinen AV-alan yritys Visusek Oy, joka on AV-järjestelmien johtava toimittaja Suomessa. Yrityksen tuotteisiin kuuluvat AV-järjestelmät avaimet käteen -periaatteella, aina pienistä neuvottelutiloista suuriin auditorioihin asti.
Opinnäytetyön tavoitteena oli ohjelmoida Visusek Oy:n projektiin AV-järjestelmä. Projektikohde oli Kauhajoen koulukeskus, josta yksi osakokonaisuus oli koulun uuden osan aulan AV-järjestelmän kokoonpano, ohjelmointi ja käyttöönotto. Projekti toteutettiin Crestron-laitetoimittajan logiikalla ja kosketusnäytöllä. Ohjelmointityökaluina käytettiin Simpl Windows -sovellusta logiikkaan ja kosketuspaneeliin Vt-Pro e -ohjelmaa, jotka ovat Crestronin kehittämiä, graafisella käyttöliittymällä toteutettuja ohjelmointityökaluja.
Projektin lopputuloksena syntyi AV-käyttöliittymä, jolla pystytään ohjaamaan aulatilan AV-laitteistoa. Tilaan tuli kaksi erillistä liitäntäpistettä kosketuspaneelille, joista kummastakin voidaan ohjata aulan kaikkia AV-toimintoja. Projektin valmistuessa asiakkaalle annetaan täydellinen käytönopastuskoulutus sekä laitteistosta tehdään kattava loppudokumentaatio kytkentä-, sijoitus- ja ohjauskaavioineen.
This thesis was assigned by Audio visual company Visusek Oy, which is a leading supplier for AV‐systems in Finland. The company’s product range is mainly to supply and install all Audio Visual Sys‐tems, from small conference room to large auditoriums.
The purpose of this thesis was to program an audio visual system to Visusek Oy’s project. The target of the project was Kauhajoki school centre. One part of it was equipped with the AV‐systems of the new area’s lobby, additionally, the programming, and re‐introduction were included in the project.
This project was carried out with Crestron‐equipment supplier’s logics and touch screens.
For logics programming Simpl Windows‐ application was used and for touch screen VT‐Pro e pro‐gram was implemented. These programming tools are created by Crestron and they have a graphi‐cal user interface for programming.
The result of the project was an Audio Visual System, with which the customer can control the lobby’s AV‐systems. Two different connection points were set to the premises which both could control the entire lobby’s Audio Visual Systems. As soon as this project is finished, the customer gets a full guidance for the use of the systems. A comprehensive documentation of the equipment is made with coupling, placement and control charts.
Opinnäytetyön tavoitteena oli ohjelmoida Visusek Oy:n projektiin AV-järjestelmä. Projektikohde oli Kauhajoen koulukeskus, josta yksi osakokonaisuus oli koulun uuden osan aulan AV-järjestelmän kokoonpano, ohjelmointi ja käyttöönotto. Projekti toteutettiin Crestron-laitetoimittajan logiikalla ja kosketusnäytöllä. Ohjelmointityökaluina käytettiin Simpl Windows -sovellusta logiikkaan ja kosketuspaneeliin Vt-Pro e -ohjelmaa, jotka ovat Crestronin kehittämiä, graafisella käyttöliittymällä toteutettuja ohjelmointityökaluja.
Projektin lopputuloksena syntyi AV-käyttöliittymä, jolla pystytään ohjaamaan aulatilan AV-laitteistoa. Tilaan tuli kaksi erillistä liitäntäpistettä kosketuspaneelille, joista kummastakin voidaan ohjata aulan kaikkia AV-toimintoja. Projektin valmistuessa asiakkaalle annetaan täydellinen käytönopastuskoulutus sekä laitteistosta tehdään kattava loppudokumentaatio kytkentä-, sijoitus- ja ohjauskaavioineen.
This thesis was assigned by Audio visual company Visusek Oy, which is a leading supplier for AV‐systems in Finland. The company’s product range is mainly to supply and install all Audio Visual Sys‐tems, from small conference room to large auditoriums.
The purpose of this thesis was to program an audio visual system to Visusek Oy’s project. The target of the project was Kauhajoki school centre. One part of it was equipped with the AV‐systems of the new area’s lobby, additionally, the programming, and re‐introduction were included in the project.
This project was carried out with Crestron‐equipment supplier’s logics and touch screens.
For logics programming Simpl Windows‐ application was used and for touch screen VT‐Pro e pro‐gram was implemented. These programming tools are created by Crestron and they have a graphi‐cal user interface for programming.
The result of the project was an Audio Visual System, with which the customer can control the lobby’s AV‐systems. Two different connection points were set to the premises which both could control the entire lobby’s Audio Visual Systems. As soon as this project is finished, the customer gets a full guidance for the use of the systems. A comprehensive documentation of the equipment is made with coupling, placement and control charts.